1. The section shape of the DE fender is semi-circular, and the whole body has uniform circular holes, and its energy absorption potential is better than that of all forms of fender at present;

2, light weight, while the protection capacity is the same, the weight of polyurethane fender is only about 1/3 of the weight of rubber fender, so that it can be used more widely on ships with demanding weight requirements

3， the DE fender is fixed with only four screws, easy installation and maintenance, suitable for larger public ships, yachts, tugs, ports and docks.

4， our company has developed a total of six types of DE polyurethane ftainer to choose from: DE-200×200, DE-200×150, DE-200×100, DE-150x100, DE-120×120, DE-100×80, other models can support customization.

1. The section shape of D-type fender is semicircular, and the whole body is hollow:

2.the absorption energy is large, the reaction is small, the weight is light;

3. Easy installation and maintenance, suitable for smaller official ships and yachts.

4. our company has developed a total of six types of D-type polyurethane fender to choose from: D-200×200, D-150×150, D-100×100, D-100×80, D-80×60, D-70×70, D-60×50.

1, polyurethane foam fender density is small, about 400kg/m3, light weight, more suitable for small boats;

2. polyurethane foam fender compression ratio is large, more energy absorption;

3. the material of polyurethane foam fencer has been optimized, excellent corrosion resistance, anti-aging performance, and can maintain good performance in the environment of 40℃~80℃;

4, polyurethane foam fender using a new foaming process, the surface has 4~5mm thick self-crust, so that its strength is higher, not easy to tear;

5. the production process of polyurethane foam fender is more environmentally friendly, compared with polyurea fender, its production process does not produce any waste water, waste gas, waste residue, polyurea fender is an ideal upgrade product.

The modified polyurethane foam fender produced by our company is superior to polyurea fender in terms of weight, strength, wear resistance and thickness resistance, and there is no pollution in the production process, and the biggest disadvantage of polyurea fender is that a lot of waste gas and fine dust are generated in the production process, resulting in serious pollution to the environment.

The modified polyurethane foam products can be produced according to user requirements, and the installation method is usually adhesive, and the bolt installation or the combination of the two can be used in special cases.

Leave your information and we will contact you.